Foil and die specialist

Ms Tasneem Latief

Tasneem matches foil wads to SA neck finishes and short-run kits.

Ms Tasneem Latief

Ms Tasneem Latief specifies aluminium induction wads, sample cuts and die condition against the neck finish sitting on the customer’s bottle. Plant managers ask for her when a new cap, liner and bottle land must be checked before production. Her bench covers 28, 33, 38 and 45 mm work through the Foil & Die Kit.

A typical week takes Tasneem from Germiston sample checks to production floors in Gauteng, KwaZulu-Natal and the Western Cape. She works with nutraceutical bottles, sauces, edible oils, personal care packs and short co-pack jobs where the closure choice still needs proving.

Short-run trials and plant notes

For R&D packs and small batches, Tasneem sets up benchtop sealing on Seal Induction Compact. She marks bottles by cap lot and fill condition, then records power setting, pass time and induction head height. Setters get a starting point that relates to their own cap and bottle.

When a trial moves to a running conveyor, she records settings used on Seal Induction Pro. Her notes cover cap torque, bottle land condition, liner diameter, thread engagement and PET or HDPE behaviour. If audit wording is needed, she shares the sample result with Ms Lesedi Molapo.

How she works through a fault

When foil lifts, wet threads appear, a neck scorches or a liner stays in the cap, Tasneem reads the pack evidence before touching the sealer settings. She asks for filled and empty samples, cap code, liner stack, torque setting and clear photos of the opened seal before choosing the next test.

On the floor she checks bottle lands, cap rock, uneven top load, product splash and liners sitting off-centre inside the closure. Undersize liners can leave an open arc at the rim after sealing. Oversize liners can wrinkle under the cap. A dull die can leave whiskers that turn into nuisance faults.

Die care and changeover control

Tasneem treats each die as part of the pack specification. She checks that the cut edge is clean, the wad sits flat in the closure and the aluminium face has not been scratched during handling. During changeovers she wants unused wads kept dry, labelled and away from cap dust.

Maintenance leads call her when repeated wad defects look like tooling trouble rather than a sealing setting. She looks for burrs on the cutting edge, crushed stacks, mixed neck sizes in one bin and caps stored under pressure. For many short SKUs, she groups samples by neck family.

When to ask for Tasneem

Ask for Tasneem when a new bottle arrives without a proven liner, a local cap substitute changes the neck finish, or a co-packer needs sample packs before buying closures in bulk. She is also the contact for neater opening peel, oil tracking under a seal and benchtop checks before a short run.

For mixed projects, Tasneem keeps foil work separate from sleeve work and brings in the right teammate from the BottleSealer team when the job moves beyond wads and dies. For a wad or die review, send cap details, sample photos and the intended bottle size through our contact form with “Tasneem” in the subject line.

Talk to the sealing counter

Contact form · Meadowdale Industrial, Germiston