Resource

Torque recipe sheet

Blank recipe sheet for Cap Torque Station SKUs.

Blank torque recipe sheet for Cap Torque Station SKUs

Torque recipe sheet

The Torque Recipe Sheet is for the setter who has to start a mixed-format capping run without guessing from the last job. Plant managers use it to keep one written setting tied to one SKU, maintenance leads use it when cap grip faults return, and QA reads it when cap tightness affects induction seal contact. Keep it with the job card for every Cap Torque Station changeover.

Use the sheet during trials, first production and every cap or bottle land change. It suits lines moving between 28, 33, 38 and 45 mm formats, where the same capper may see sauce, oil, personal care or chemical packs in one week. The setter reads the saved entry, enters the recipe, then checks sample bottles before full packing.

Fill it in from the top down

Start with the SKU code and product name exactly as shown on the job card. Then write the bottle size, material and neck finish, because a 38 mm cap on PET can behave differently to a 38 mm cap on HDPE. Next record the cap description: diameter, thread type if known, liner type, ribbed or smooth side wall, and any flip-top or child-resistant detail.

The next line is the bottle land note. Use plain plant wording such as flat, clean, domed, narrow, scuffed trial moulding or supplier sample. After that, write the target torque with the unit used by your tester. Add the station recipe number, chuck or pad reference, cap feed note, date, setter name and QA sign-off once the samples have passed.

Worked example

A completed entry might read: SKU SAU500-BBQ, 500 ml PET sauce bottle, 38 mm neck finish, ribbed 38 mm cap with induction liner, flat bottle land, target torque 165 Ncm, Cap Torque Station recipe 14, medium torque head pad, cap chute set for ribbed cap, entered by day shift and signed off by QA after sample checks. The next sauce run then starts from that written entry, not from memory.

Fit and maintenance notes

The recipe must match the parts fitted on the machine. If the torque head pad changes from a soft pad to a firmer pad, record the new pad against the SKU after fresh samples have been tested. Check that the chuck grips squarely, the side guides hold the bottle without squeezing it, and the cap feed presents caps the same way after a pause.

Keep the sheet clean in a plastic sleeve at the production point, rewrite damaged entries, and remove old recipes after a cap supplier, liner or bottle moulding change. If the line also uses induction sealing, store it beside the Seal Check Card so torque and seal checks can be read together during audits.

Common mistakes

The usual mistakes are writing “38 mm cap” with no neck finish, cap style or bottle land note; copying the previous SKU because it looks close; missing the torque unit; using a target from a hand capper trial; forgetting the recipe number; and filling in the sheet after the run from memory. For more changeover examples, read torque recipes for SKU swaps, send a message through our contact form, or bring the job brief to the counter in Meadowdale Industrial, Germiston.

Talk to the sealing counter

Contact form · Meadowdale Industrial, Germiston