Fixture
Vision light bar
LED bar spares for Seal Inspect Vision tunnels.
Vision light bar
The Vision light bar is the LED lighting spare inside a Seal Inspect Vision tunnel. It lights the cap, neck and seal area so the camera gets a clean image while bottles pass the inspection point. On sauce, oil, nutraceutical and pharma syrup lines, weak or uneven light shows up as false rejects, missed cap faults and extra handling at the packing table.
This bar pairs with BottleSealer Seal Inspect Vision tunnels, including inspection cells mounted on a Line Integration Rail with side guides, sensors and an air reject. It is commonly fitted after induction sealing, where the inspection station checks for missing liners, skew caps and seal defects once packs have returned to normal spacing.
Fitment sequence for line setters
Lock out the inspection cell, stop the conveyor and remove the vision tunnel cover panel. Note the old bar orientation, cable route and plug position before loosening the mounting screws. Fit the new Vision light bar into the same bracket, with the LED face square to the bottle path and clear of guide rail rub points.
Reconnect the plug, refit the cover and power the tunnel. Run several capped bottles through at normal pitch. Use the live camera image to centre the lit area on the cap and neck, then tighten the bracket once the closure edge, bottle shoulder and seal land are evenly lit. Record the final position in the setter notes for that SKU.
Adjustment and image checks
Check the light bar setting after guide changes, camera work, cap size changes and rail movement. A good setting gives a bright cap rim without glare on glossy caps or dark shadows under tall closures. If reject timing has been changed, confirm the lit inspection point still matches the air-blast position using the vision reject map.
Washdown spray and humid air can fog the light bar cover and camera window. Wipe both dry before the shift, especially after weekend cleaning or a long stop with covers closed. Use a lint-free cloth and a cleaner suited to the cover material. Water marks, detergent film and fingerprints scatter the LED output and make the camera chase brightness instead of faults.
Wear, faults and replacement signs
Check the Vision light bar at the start of each production week and during planned line cleaning. Look for dim sections, flicker, colour change, cracked covers, loose plugs, swollen cable jackets and bracket movement. The LED face should sit clean and flat behind its cover, with no trapped label glue, cap dust or product mist blocking the light path.
Replace the bar when the camera image has one dark side, repeated false rejects continue after window cleaning, the light flickers when the cable is touched, or the cover is crazed from cleaning chemical exposure. A failing bar often shows itself first on dark caps, tall caps or shiny closures, where the recipe needs steady light to separate the cap edge from the neck.
Ordering notes and support
When ordering a Vision light bar, quote the Seal Inspect Vision tunnel model, line layout, bottle size range, cap colour range, a photo of the fitted bar, plug type and the side from which the cable exits. If the tunnel sits on a rail cell, include the inspection station position and reject pocket location.
For spares planning, keep the light bar listed with camera window covers, sensor leads and reject air fittings rather than with general electrical stock. The BottleSealer counter is in Meadowdale Industrial, Germiston, and quote requests can be sent through our contact form. For related inspection parts, include any sensor kit notes in the same email.
What our Bottle Sealing customers say
Verified Google reviews
