Service pack

Spares & Care Kit

Coil, belt and sensor spares, with a service card for the plant’s maintenance team.

Spares & Care Kit

Spares & Care Kit

The Spares & Care Kit keeps service parts and the quarterly card together for a BottleSealer induction cell. It gives the fitter matched coil parts, drive belt parts and bottle-present sensor parts for the live sealer, with a place to write the date, model, part changed and sample result after the stop.

The serviced induction cell sits after capping, once the bottle has the right aluminium liner and the cap torque has been set. After the part change, the setter runs capped samples through the sealer, opens them at the bench and records the bond around the bottle land. See the Spares & Care Kit specs for pack structure.

Packing floors that use it

A Germiston co-pack floor running sauces and condiments can keep the kit in the workshop for Friday changeovers, where several PET and HDPE neck finishes move through one induction cell. The card gives maintenance, QA and the line setter one record for the sealer family, cap format and service result.

In a Paarl dairy cultures room, the kit fits planned clean-down windows where the induction sealer is already stopped. In a Durban personal-care plant, it suits shampoo, cream and lotion packs where steady bottle spacing and cap torque checks sit in the normal start-up routine.

First shift with the kit

The first shift starts by matching the kit label to the sealer nameplate, neck size and cap style on the job card. The fitter lays out the coil parts, belt parts and sensor parts, then checks worn belt surfaces, damaged sensor faces and loose mounting hardware before fitting anything.

After the change, the setter brings bottles through at a controlled pace and watches spacing, cap contact and head height above the cap. Samples are opened while they still belong to that job. A clean pull, a continuous heat-seal ring and no leak on an inverted sample give the shift its release point.

Maintenance rhythm and failure modes

The quarterly card gives the engineering team a repeatable service rhythm across co-pack fleets and contract-packing rooms. Each card follows the sealer family, so a conveyor-fed Pro, benchtop Compact or hand-wand unit is tracked against its own parts and sample notes.

Common faults point straight back to service items. A glazed or stretched belt can cause bottle hesitation and uneven heating time. A dirty or knocked sensor can miss the bottle-present signal and stop the cycle. Impact damage around the sealing head can show as scorched liners, weak edge bonding or patchy release. Book planned work through the Spares & Care Kit service lines.

Fit to the live sealer

For conveyor-fed PET and HDPE production, match the kit to the Seal Induction Pro so the belt and sensor parts suit continuous line running. For R&D rooms, pilot batches and short-run contract work, the benchtop Seal Induction Compact is the better sealer match. Farm stalls, trial packs and mobile sealing work sit well with the Manual Hand Sealer kit family.

For a kit brief, send the sealer model name, cap neck size in millimetres, bottle material and normal line pace through our contact form. Collections and co-pack briefs run through the counter at Meadowdale Industrial, Germiston, close to Edenvale, Bedfordview and OR Tambo routes.

Rate bandQuarterly kit cadence
Power / utilitiesMatched to live sealer
Neck / formatPads and belts by family

Specs · Service.

What our Bottle Sealing customers say

Verified Google reviews

Talk to the sealing counter

Contact form · Meadowdale Industrial, Germiston