Spares & Care Kit specs
A Spares & Care Kit is sized from the machine on the floor. Start at the sealer, read the model label, check the last care card and identify whether the part sits at the head, drive path or cap sensing point. The spec line becomes a work instruction for the fitter.
The rate band describes the duty of the host sealer, not the output of the kit. Continuous sealer kits suit repeated cap passes and long running, while bench sealer kits suit slower hand-fed work. Confirm the host family against Seal Induction Pro or Seal Induction Compact.
Prepare the bay and utilities
Stop the line, isolate the sealer and clear caps, loose liners and tools from the work area. Put guard screws, clamps and fasteners in a marked tray so nothing lands in the conveyor. The kit has no separate utility demand; electrical spares follow the host sealer rating and plug arrangement.
Before fitment, compare the new part with the removed part on the bench. Check mounting holes, plug face, cable length, belt width and wear surface. A glazed belt points to tracking or tension work as well as replacement. A cracked sensor face or loose lead needs a clamp and cable route check.
Fit to the bottle format
Neck numbers such as 28, 33, 38 and 45 mm are bottle finish groups used by setters, QA and maintenance. Take a capped production bottle off the conveyor and match its finish and liner stack to the format written on the card. Mark every changeover finish on that same sealer card.
Fit head parts square to their bracket, tension the belt so it runs in the centre of its path and set the sensor face to see caps without seeing rails or hands. Use proven rail marks where they exist. If guides have moved, lock the bottle upright through standard guide rail settings.
Set, run samples and accept the spare
Start with a dry pass and watch belt tracking, bottle pitch and sensor light behaviour. Then run a small sample using normal caps, liners and filled bottles from the production batch. The fitter checks steady cap movement under the head, no belt wander, no false triggers and no cable rub against the frame.
Acceptance is recorded against the pack result, not only the new spare. Remove sample caps, inspect how the liner has taken to the bottle finish, then note peel feel, leaks and visible heat damage in the words used by QA. The seal check card gives one format for those notes.
Handover record and sizing details
At handover, write the sealer model, spare family, date fitted, neck finish, belt tension note, sensor position note, pack result and name of the person who signed off the run. Keep the removed part until the next shift has run. Edge wear, cable breaks and heat marks often explain the stoppage. The handoff template keeps notes together.
For kit sizing, send the sealer model photo, control box label, current care card, clear photos of the worn head part, belt or sensor, plus one capped bottle from each neck finish in the changeover group. Add the line speed target in words, product family and recent fault notes. For a kit query, send a message through our contact form with the photo set and mark the subject with the sealer model.
| Model | Spares & Care Kit |
|---|---|
| Rate band | Quarterly kit cadence |
| Power / utilities | Matched to live sealer |
| Neck / format | Pads and belts by family |
Parent: Spares & Care Kit.
What our Bottle Sealing customers say
Verified Google reviews
