Midrand

Midrand torque recipes

Cap Torque Station recipes for personal care SKU swaps.

Midrand Cap Torque Station with Joburg skyline through glazing

Midrand torque recipes

A Midrand personal care line packing lotions, creams and washes was changing caps through the shift on 28 mm, 33 mm, 38 mm and 45 mm neck finishes. The same filler fed bottles with disc-top caps, flip-tops and screw caps, so the cap load had to follow the pack being run. The project centred on stored servo torque recipes for the personal care SKU list, rather than a setter chasing one manual setting across different closures.

The job started after changeovers began taking too long and first-off bottles needed repeated checks. Some caps were being driven hard after a larger cap run, while the next smaller cap could leave the station with a softer grip than the QA sample called for. The plant wanted named recipes, fast recall and a repeatable handover between the setter, the filling operator and the maintenance lead.

Survey on the Midrand line

The survey mapped the capper exit, the straight conveyor space, bottle pitch, side-guide condition and operator access at the Midrand line. Khanyisile Mdletshe checked how the bottles behaved when lotion residue reached the cap skirt, and where a setter could see the cap head, HMI and sample point without stepping into the pack flow. The work also noted which SKUs would move on to induction sealing after torque capping.

Recipe set-up and changeover sequence

The Cap Torque Station was set into the existing conveyor flow and indexed to the bottle centreline. The guides were opened and reset for each bottle family, then torque head pads were matched to the cap styles that actually ran on the line. Each recipe was named by bottle family, cap style, neck finish and torque target, so the loaded HMI setting matched the pack in front of the operator.

During set-up, the line setter loaded the next recipe, capped a short first-off group, checked the cap removal readings and released the batch once the samples matched the QA card. The station can run up to 90 bpm once the recipe is loaded and the line is settled. Where the same pack ran onward through the Seal Induction Pro, torque was confirmed first so the liner sat squarely under cap load.

First-week fault and fix

In the first week, a 38 mm lotion cap showed a wider spread in torque readings after a run of 45 mm cream packs. The servo recipe had been selected correctly, but the previous torque head pad was still fitted. It gripped the smaller ribbed cap on the wrong band and slipped on some bottles, then over-tightened the next few. The fix was simple: pad codes were added to each recipe name, the pad rack was marked by cap family and the changeover check now includes the fitted pad.

Running and care now

The Midrand line now runs each SKU from a saved recipe and records any change on the torque recipe sheet. Setters clean lotion build-up from the cap contact area, inspect the pad face for glazing, confirm the side guides after every neck change and keep first-off samples with the batch notes. When a new lotion or cream closure is added, cap samples and the current recipe sheet can be sent through our contact form for torque pad matching before the change reaches the Midrand filler.

What our Bottle Sealing customers say

Verified Google reviews

Talk to the sealing counter

Contact form · Meadowdale Industrial, Germiston