Line

Personal care

Shampoo and lotion bottles with torque recipes and foil seals for chain stores.

Primary sealer: Cap Torque Station

Personal-care bottles at a torque and foil sealing station

Personal care

Personal care filling rooms in South Africa commonly pack PET and HDPE bottles for shampoo, conditioner, body wash, lotion, hair treatment and sanitiser gel. Chain-store packs commonly use flip-top, disc-top or screw caps over an induction foil, with pumps fitted after sealing on some lotion SKUs. Viscous, slippery fills make cap grip, bottle centring and a clean neck land the main floor checks.

These products behave differently at the filler. Shampoo can foam on a fast drop, conditioner can string across the neck, and lotion can leave oil or silicone on the bottle land. A warm bulk tank changes bottle feel and cap seating during the shift. The seal programme must suit the closure, the liner and the actual filled pack, not only the empty sample bottle.

Where shampoo and lotion seals fail

The common failure is a foil that peels too cleanly or leaks when a bottle is squeezed. Causes include low cap torque, a cap that bottoms out on its thread before pressing the liner, product smear on the land, oval HDPE necks, or a liner sitting off-centre inside the cap. Over-torque can distort a soft shoulder and make the cap rock as the bottle moves under the sealing head.

BottleSealer starts personal care work with measured closure force on the Cap Torque Station. Each cap style gets its own recipe, including the top-load feel needed to press the liner flat without damaging the thread. Plants running frequent fragrance, colour or bottle changes should keep a setter sheet at the capper; the torque recipe sheet gives the team a repeatable handover point.

Recommended cell layout

For chain-store shampoo and lotion runs, the normal set-up is cap torque first, then continuous induction sealing on the Seal Induction Pro, mounted on a Line Integration Rail so the bottle is presented square, controlled at the sides and diverted if a no-seal condition is found. During commissioning, the line setter records bottle height, cap type, foil wad, sealing head position, output setting, conveyor pace and reject timing for every retail SKU.

The production flow is: fill the bottle, control any neck splash, place the cap, apply the stored torque recipe, seal through the capped closure, let the pack cool on the outfeed, inspect samples, label the dry bottle, then case pack. Pumps and trigger closures used on some lotion formats are usually added after the foil step so the seal remains clean and flat.

Fit and maintenance notes for line setters

Personal care bottles can be narrow, tall and glossy, so guide contact matters. Side guides need enough contact to keep a glossy oval bottle upright while leaving the label panel clear, and the cap must pass level under the sealing head without shoulder bounce. If a bottle leans after filling, check base push-up, air trapped in the product, guide pressure and cap chute alignment before changing the sealing programme.

Maintenance teams should clean lotion build-up from cap handling parts, wipe sensor faces, check torque head pads for glazing and keep the outfeed dry. A weekly sample routine should include peel feel, foil colour, squeeze leakage and cap removal feel. The seal check card keeps those observations in one format for retail audits and shift handovers.

Typical personal care request

A contract packer in Gauteng needed a single sealing station for 28 mm shampoo and 38 mm lotion bottles on a chain-store order. The brief was fewer leakers after transport, faster SKU changeover and recorded cap settings for night shift. BottleSealer set up torque recipes, matched foil wads from the foil neck chart, commissioned the induction settings and marked the guide positions. Filled shampoo and lotion samples give a better trial than empty packs because fragrance oils, colourants and product temperature change cap seating and foil peel feel.

What our Bottle Sealing customers say

Verified Google reviews

Talk to the sealing counter

Contact form · Meadowdale Industrial, Germiston