Resource

Spares schedule

Quarterly coil, belt, and sensor cadence card.

Quarterly coil, belt and sensor cadence schedule card

Spares schedule

The spares schedule is a quarter-by-quarter card for coil assemblies, belts, sensors and wear items on sealing, conveying and steam banding cells. Plant managers use it for planned stops and purchasing, line setters use it during format changes, and maintenance leads use it after faults or campaign runs. It suits induction lines such as Seal Induction Pro, rail-mounted reject cells, benchtop sealing work and steam sleeve stations in busy co-pack rooms.

Fill the card when a line is commissioned, when a new bottle or cap is introduced, and at the start of each quarter. The aim is simple: record what was checked, what was used, what remains in the cupboard, and what must be collected from Meadowdale Industrial, Germiston. For a matched card, send a message through our contact form with the model name, pack format and line position.

Who signs off each entry

The maintenance lead owns the card, but the setter on the shift should supply the running notes. A setter sees belt tracking, sensor reads, cap presentation, reject timing and steam marks while bottles are moving. The plant manager then sees a short list of parts rather than a vague request. On mixed lines, the same card can separate induction items from sleeve, rail and tunnel items so the wrong part is not booked against the wrong cell.

Complete the boxes in order

Start with the asset name, line number and station, then write the quarter and date checked. Add pack size, neck finish, cap type and product family, because these details affect what wears and what gets changed. Next record the duty note: trial run, export week, weekend catch-up, short campaign or regular production. Then list the part group, quantity held, quantity used, action needed, owner initials and next review date.

For rail and reject work, add sensor voltage, connector type, reject pocket side and the station being watched. A Line Integration Rail entry says whether the sensor reads bottle entry, cap presence, product position or reject confirmation. For steam sleeve work, link the entry to the band lane or tunnel. For wide-mouth jerry and gallon formats, note the Steam Tunnel L station so hood seals and sleeve feed parts are picked correctly.

Worked example of a filled-in entry

A useful entry reads like this in prose: Line 2, Seal Induction Pro, 38 mm sauce bottle, white cap, Quarter 2, export campaign. Coil assembly inspected, conveyor belt edge polished on the operator side, 24 V sensor lens scratched at the reject station, one belt and one sensor kit to be drawn. Bheki signed the check on 6 May and set the next review before the following export batch.

Mistakes that cause repeat call-outs

The common mistakes are using short machine names, leaving out neck size, writing “sensor” without the station, and mixing sleeve lane parts with induction rail parts. Another common miss is recording a belt change without the rub point or guide note, so the new belt wears the same way. On steam lines, hood gasket wear is often noticed only after bands show wrinkles, wet marks or uneven shrink.

Do not skip a quarter because the line ran lightly. Low-use equipment still gets dusty lenses, stiff belts, damaged plugs and missing change parts. A Spares & Care Kit works best when the card shows parts consumed, parts still on site and parts needed before the next planned stop. That stops double ordering and keeps small items from delaying a changeover.

Using the card for collection and fitting

Before collection at Meadowdale Industrial, Germiston, compare the card with the machine label and current pack format. Bring the removed part if the description is uncertain, especially for belts, sensor leads and steam hood seals. After fitting, write the date, fitter initials and reason for change: worn edge, cracked lens, heat mark, poor tracking or damaged connector. The next quarter then starts with facts from the floor, not guesswork.

Talk to the sealing counter

Contact form · Meadowdale Industrial, Germiston