Seal Induction Pro service
Seal Induction Pro service keeps the continuous sealer ready for PET and HDPE containers with aluminium foil liners under screw caps. On sauce, oil, chemical and nutraceutical lines, the service focus is the cap path, head height setting, sensor timing, cooling airflow and torque handover from the capper. A visit should end with sample bottles opened and checked by the plant team.
Use the machine record for the Seal Induction Pro to confirm neck sizes, recipe names and last parts fitted. Record whether the line runs 28, 33 or 38 mm necks, which cap supplier is in use, and which foil wad grade was fitted during the last good production run.
Care cadence on the production floor
Each shift, isolate the machine and wipe the head face, cap guide area, belt path and sensor lens. Remove foil dust, cap swarf and sticky product mist before start-up. Confirm the recipe against the SKU, check cap torque on first bottles, and reject bottles that stopped under the head during a pause.
Weekly, inspect guide pads, belt tracking, guard interlocks, fasteners and cable strain reliefs. Monthly, clean fan inlets, check the isolator action, inspect the head mount scale marks and review the fault log after power dips. Quarterly, book service with the plant’s Spares & Care Kit on hand.
Wear parts and what wear looks like
A worn belt shows shiny glazing, cracked edges, loose fibres or side wander that moves the bottle off the cap path. Tired guide pads show gouges, cap-coloured powder and a step worn into the contact face. A sensor nearing replacement gives erratic bottle counts even after the lens has been cleaned.
Foil wads and caps are part of the sealing condition. With the Foil & Die Kit, check that wads sit flat in the cap and match the neck finish. Feathered wad edges, off-centre liner marks or repeated half-moon bonds point to cap, wad or torque changes.
Safe isolation before guards are opened
For guard access, isolate first: stop upstream feed, remove containers from the head zone, press the emergency stop and turn the machine isolator off. Apply the plant lock and tag, then test that the belt cannot start from the local control. Let hot surfaces cool, keep wet cleaning away from live panels, and refit every guard before trial bottles run.
Fault symptoms and likely fixes
A liner that peels off with a dry ring often traces back to low cap torque, product on the bottle land, the wrong recipe, or a head height setting moved during changeover. Fix the capper first, clean the bottle finish, load the proven recipe and reset the height marks. Where torque drift repeats, compare readings with the Cap Torque Station record.
Random missing seals usually come from bottle wander, a dirty sensor lens, loose guide hardware or mixed cap heights in the hopper. Overheated liners, domed caps or neck scuffing point to stopped bottles under heat, an over-strong recipe or a line speed drop after a jam. After a power cut, follow power-cut restart notes and record any error code.
What to prepare before a technician visit
For a Seal Induction Pro service booking, send us the serial plate photo, alarm screen, SKU name, neck diameter, cap construction, liner grade, normal line rate, last good run date and a short video of bottles entering and leaving the sealing head. Include photos of good and failed seals, the capper torque reading, the fault frequency and any recent cap, foil or bottle supplier change. Keep the last rejected bottles, their caps and the matching good samples aside so the technician can compare seal marks during the visit.
What our Bottle Sealing customers say
Verified Google reviews
